Skip to content
Category

IBM microprocessors

page 1
Cell
multi-core microprocessor
IBM POWER
series of microprocessors from IBM
PowerPC 970
64 bit processor
POWER5
thumb|right|280px|A MCM containing four POWER5 dies and four 36 MB L3 cache dies. Measuring 3.75in x 3.75in thumb|right|280px|Processor module from an IBM i5 system, containing a POWER5+ DCM thumb|2 way POWER5 CPU, heat-sink removed (damaged CPU die) thumb|IBM POWER5+ 8-way MCM CPUs and cache chips. thumb|IBM POWER5+ 8-way MCM Interface. thumb|IBM POWER5+ 8-way MCM side view. The POWER5 is a microprocessor developed and fabricated by IBM. It is an improved version of the POWER4. The principal improvements are support for simultaneous multithreading (SMT) and an on-die memory controller. The PO
Broadway
Nintendo microprocessor codename
PowerPC 7xx
family of third generation 32-bit PowerPC microprocessors
Microsoft XCPU
central processing unit used by Xbox 360 video game console
POWER4
The POWER4 is a microprocessor developed by International Business Machines (IBM) that implemented the 64-bit PowerPC and PowerPC AS instruction set architectures. Released in 2001, the POWER4 succeeded the POWER3 and RS64 microprocessors, enabling RS/6000 and eServer iSeries models of AS/400 computer servers to run on the same processor, as a step toward converging the two lines. The POWER4 was a multicore microprocessor, with two cores on a single die, the first non-embedded microprocessor to do so. POWER4 Chip was first commercially available multiprocessor chip. The original POWER4 had a c
POWER6
The POWER6 is a microprocessor developed by IBM that implemented the Power ISA v.2.05. When it became available in systems in 2007, it succeeded the POWER5+ as IBM's flagship Power microprocessor. It is claimed to be part of the eCLipz project, said to have a goal of converging IBM's server hardware where practical (hence "ipz" in the acronym: iSeries, pSeries, and zSeries). thumb|IBM Power6 CPU base thumb|Power6 ceramic base, heat spreader removed thumb|Power6 ceramic base, top thumb|Power6 ceramic base, contacts ==History== POWER6 was described at the International Solid-State Circuits Confe
PowerPC 600
microarchitecture
POWER3
thumb|right|280px|Dual 375 MHz IBM POWER3-II processors on the CPU module of a RS/6000 44P 270.
POWER7
POWER7 is a family of superscalar multi-core microprocessors based on the Power ISA 2.06 instruction set architecture released in 2010 that succeeded the POWER6 and POWER6+. POWER7 was developed by IBM at several sites including IBM's Rochester, MN; Austin, TX; Essex Junction, VT; T. J. Watson Research Center, NY; Bromont, QC and IBM Deutschland Research & Development GmbH, Böblingen, Germany laboratories. IBM announced servers based on POWER7 on 8 February 2010. thumb|IBM Power7 4 GHz 8-way CPU and IHS from an IBM 9119 thumb|IBM Power7 4 GHz 8-way CPU IHS top from an IBM 9119 thumb|
Espresso
IBM microprocessor
POWER1
The POWER1 is a multi-chip CPU developed and fabricated by IBM that implemented the POWER instruction set architecture (ISA). It was originally known as the RISC System/6000 CPU or, when in an abbreviated form, the RS/6000 CPU, before introduction of successors required the original name to be replaced with one that used the same naming scheme (POWERn) as its successors in order to differentiate it from the newer designs.
IBM RS64
family of microprocessors
POWER9
POWER9 is a family of superscalar, multithreading, multi-core microprocessors produced by IBM, based on the Power ISA. It was announced in August 2016. The POWER9-based processors are being manufactured using a 14 nm FinFET process, in 12- and 24-core versions, for scale out and scale up applications, and possibly other variations, since the POWER9 architecture is open for licensing and modification by the OpenPOWER Foundation members.
Gekko
microprocessor
POWER8
thumb|upright=1.6|IBM Power E870 can be configured with up to 80 POWER8 cores and 8 TB of RAM.
POWER2
The POWER2, originally named RIOS2, is a processor designed by IBM that implemented the POWER instruction set architecture. The POWER2 was the successor of the POWER1, debuting in September 1993 within IBM's RS/6000 systems. When introduced, the POWER2 was the fastest microprocessor, surpassing the Alpha 21064. When the Alpha 21064A was introduced in 1993, the POWER2 lost the lead and became second. IBM claimed that the performance for a 62.5 MHz POWER2 was 73.3 SPECint92 and 134.6 SPECfp92.
ROMP
early 1980s RISC CPU from IBM
RISC Single Chip
the single chip version of the POWER1 processor
POWER10
Power10 is a superscalar, multithreading, multi-core microprocessor family, based on the open source Power ISA, announced in August 2020 and available from September 2021. The processor is designed to have 15 cores available. The main features of Power10 are higher performance per watt and better memory and I/O architectures, with a focus on artificial intelligence (AI) workloads. Each Power10 core has doubled up on most functional units compared to its predecessor POWER9. Power10 is available in a range of IBM models and is supported by operating systems including Linux 5.9 and PowerVM. The b
IBM PALM processor
16-bit CPU released by IBM in 1975
PowerPC 400
processor series
IBM Telum
2021 64-bit mainframe microprocessor by IBM