32-bit microprocessors

series of single-core Intel CPUs

thumb|Intel A80386DX-20 CPU die image

line of desktop and mobile microprocessors produced by Intel

family of Intel microprocessors

family of Intel microprocessors

The Intel 486, officially named i486 and also known as 80486, is a microprocessor introduced in 1989. It is a higher-performance follow-up to the Intel 386. It represents the fourth generation of binary compatible CPUs following the 8086 of 1978, the Intel 80286 of 1982, and 1985's i386.

microprocessor

series of SoC and SiP processors from Apple

thumb|DEC StrongARM SA-110 microprocessor

microprocessor model

SuperH (or SH) is a 32-bit reduced instruction set computing (RISC) instruction set architecture (ISA) developed by Hitachi and currently produced by Renesas. It is implemented by microcontrollers and microprocessors for embedded systems.

instruction set

microprocessor

32-bit microprocessor

RISC-based microprocessor design

32-bit microprocessor

32-bit microprocessor model

designation used by Apple Computer and Eyetech to describe a fourth generation of 32-bit PowerPC microprocessors

RISC-based microprocessor design

family of Intel Pentium 1 microprocessors

thumb|T414 transputer chip thumb|IMSB008 base platform with IMSB419 and IMSB404 modules mounted The transputer is a series of microprocessors from the 1980s, intended for parallel computing. To support this, each transputer had its own integrated memory and serial communication links to exchange data with other transputers. They were designed and produced by Inmos, a semiconductor company based in Bristol, United Kingdom.

microprocessor model

family of third generation 32-bit PowerPC microprocessors

group of 32-bit RISC processor cores

32-bit microprocessor model released in 1992

The NS32000, sometimes known as the 32k, is a series of microprocessors produced by National Semiconductor. Design work began around 1980 and it was announced at the International Solid-State Circuits Conference in April 1981.

ARM9 is a group of 32-bit RISC ARM processor cores licensed by ARM Holdings for microcontroller use. The ARM9 core family consists of ARM9TDMI, ARM940T, ARM9E-S, ARM966E-S, ARM920T, ARM922T, ARM946E-S, ARM9EJ-S, ARM926EJ-S, ARM968E-S, ARM996HS. ARM9 cores were released from 1998 to 2006, and no longer recommended for new IC designs; newer alternatives are ARM Cortex-M cores.

ARM7 is a group of 32-bit RISC ARM processor cores licensed by ARM Holdings for microcontroller use. The ARM7 core family consists of ARM700, ARM710, ARM7DI, ARM710a, ARM720T, ARM740T, ARM710T, ARM7TDMI, ARM7TDMI-S, ARM7EJ-S. The ARM7TDMI and ARM7TDMI-S were the most popular cores of the family. ARM7 cores were released from 1993 to 2001 and no longer recommended for new IC designs; newer alternatives are ARM Cortex-M cores.

microprocessor by Zilog

microarchitecture

The R3000 is a 32-bit RISC microprocessor chipset developed by MIPS Computer Systems that implemented the MIPS I instruction set architecture (ISA). Introduced in June 1988, it was the second MIPS implementation, succeeding the R2000 as the flagship MIPS microprocessor. It operated at 20, 25 and 33.33 MHz.

ARM11 is a group of 32-bit RISC ARM processor cores licensed by ARM Holdings. The ARM11 core family consists of ARM1136J(F)-S, ARM1156T2(F)-S, ARM1176JZ(F)-S, and ARM11MPCore. Since ARM11 cores were released from 2002 to 2005, and no longer recommended for new IC designs, newer alternatives are ARM Cortex-A and ARM Cortex-R cores.

The POWER1 is a multi-chip CPU developed and fabricated by IBM that implemented the POWER instruction set architecture (ISA). It was originally known as the RISC System/6000 CPU or, when in an abbreviated form, the RS/6000 CPU, before introduction of successors required the original name to be replaced with one that used the same naming scheme (POWERn) as its successors in order to differentiate it from the newer designs.

series of Chinese supercomputing processors

family of 32-bit microprocessors

thumb|right|180px|80486SLThe Intel i486SL is the power-saving variant of the i486DX microprocessor. The SL was designed for use in mobile computers. It was produced between November 1992 and June 1993. Clock speeds available were 20, 25 and 33 MHz. The i486SL contained all features of the i486DX. This version performed more than twice and consumes 50% less power than the Intel386 SL version.

The i486SX was a microprocessor originally released by Intel in 1991. It was a modified Intel i486DX microprocessor with its floating-point unit (FPU) disabled. It was intended as a lower-cost CPU for use in low-end systems—selling for US$258—adapting the SX suffix of the earlier i386SX in order to connote a lower-cost option. However, unlike the i386SX, which had a 16-bit external data bus and a 24-bit external address bus (compared to the fully 32-bit i386DX, its higher-cost counterpoint), the i486SX was entirely 32-bit. The Intel486 SX-20 CPU can perform up 20 MIPS at 25 MHz while this can

The POWER2, originally named RIOS2, is a processor designed by IBM that implemented the POWER instruction set architecture. The POWER2 was the successor of the POWER1, debuting in September 1993 within IBM's RS/6000 systems. When introduced, the POWER2 was the fastest microprocessor, surpassing the Alpha 21064. When the Alpha 21064A was introduced in 1993, the POWER2 lost the lead and became second. IBM claimed that the performance for a 62.5 MHz POWER2 was 73.3 SPECint92 and 134.6 SPECfp92.

family of microprocessor cores with ARM microarchitecture

Family of microprocessor cores with ARM microarchitecture

variant of the Intel 386 microprocessor designed for embedded systems, introduced in August 1994

The SuperSPARC is a microprocessor that implements the SPARC V8 instruction set architecture (ISA) developed by Sun Microsystems. 33 and 40 MHz versions were introduced in 1992. The SuperSPARC contains 3.1 million transistors. It was fabricated by Texas Instruments (TI) at Miho, Japan in a 0.8 micrometre triple-metal BiCMOS process.

32-bit microprocessor model released in 1994

central processing unit

32-bit microprocessor chip set developed by MIPS Computer Systems

thumb|The followup to the TMS34010, the TMS34020

32-bit RISC-like computing architecture

microprocessor developed by Motorola

microprocessor

The microSPARC (code-named Tsunami) is a discontinued microprocessor implementing the SPARC V8 instruction set architecture (ISA), developed by Sun Microsystems. It is a low-end microprocessor intended for low-end workstations and embedded systems. The microprocessor was developed by Sun, but the floating-point unit (FPU) was licensed from Meiko Scientific. It contains 800,000 transistors. It was used in the SPARCclassic and SPARCstation LX among others.

Russian microprocessor

variant of the Intel 80386SX intended for embedded systems ( introduced January 16, 1989)

200px|thumb|U80701FC|right The U80701 is a 32-bit microprocessor developed from 1986-1990 in the German Democratic Republic. It was manufactured by VEB Mikroelektronik "Karl Marx" Erfurt (MME) in NMOS technology and is encased in a ceramic quad flat package (CQFP-68 package).

right|thumb|A PA-7150 microprocessor

The TurboSPARC is a microprocessor that implements the SPARC V8 instruction set architecture (ISA) developed by Fujitsu Microelectronics, Inc. (FMI), the United States subsidiary of the Japanese multinational information technology equipment and services company Fujitsu Limited located in San Jose, California. It was a low-end microprocessor primarily developed as an upgrade for the Sun Microsystems microSPARC-II-based SPARCstation 5 workstation. It was introduced on 30 September 1996, with a 170 MHz version priced at US$499 in quantities of 1,000. The TurboSPARC was mostly succeeded in t

MIPS-X is a reduced instruction set computer (RISC) microprocessor and instruction set architecture (ISA) developed as a follow-on project to the MIPS project at Stanford University by the same team that developed MIPS. The project was supported by the Defense Advanced Research Projects Agency (DARPA) and began in 1984. Its final form was described in a set of papers released in 1986–87. Unlike its older cousin, MIPS-X was never commercialized as a workstation central processing unit (CPU), and has mainly been seen in embedded system designs based on chips designed by Integrated Information Te

family of digital signal processor chips produced by Motorola

microprocessor made by Apollo Computer

RapidCAD is a specially packaged Intel 486DX and a dummy floating-point unit (FPU) designed as pin-compatible replacements for an Intel 80386 processor and 80387 FPU. Because the i486DX has a working on-chip FPU, a dummy FPU package (the "RapidCAD-2") is supplied to go in the Intel 387 FPU socket. The dummy FPU is used to provide the FERR signal, necessary for compatibility purposes.

processor series