.svg)
dislocation
Sign in to savethumb|upright=1.5|Dislocations of edge (left) and screw (right) type. In materials science, a dislocation is a linear crystallographic defect or irregularity within a crystal structure that contains an abrupt change in the arrangement of atoms. The movement of dislocations allows atoms to slide over each other at low stress levels and is known as glide or slip. The crystalline order is restored on either side of a glide dislocation but the atoms on one side have moved by one position. The crystalline order is not fully restored with a partial dislocation. A dislocation defines the boundary bet
Article
36 sectionsContents
- History
- Mechanisms
- Generating dislocations
- Homogeneous nucleation
- Frank–Read source
- Surfaces
- Interfaces
- Irradiation
- Interaction and arrangement
- Geometrically necessary dislocations
- Pinning
- Persistent slip bands
- Movement
- Glide
- Climb
- Dislocation avalanches
- Dislocation Velocity
- Geometry
- Edge
- Screw
- Mixed
- Partial
- Stair-rod and the Lomer–Cottrell junction
- Jog
- Kink
- Example in two dimensions (2D)
- Observation
- Transmission electron microscopy (TEM)
- Other methods
- Chemical etching
- Dislocation forces
- Forces on dislocations
- Forces between dislocations
- Free surface forces
- References
- External links
thumb|upright=1.5|Dislocations of edge (left) and screw (right) type. In materials science, a dislocation is a linear crystallographic defect or irregularity within a crystal structure that contains an abrupt change in the arrangement of atoms. The movement of dislocations allows atoms to slide over each other at low stress levels and is known as glide or slip. The crystalline order is restored on either side of a glide dislocation but the atoms on one side have moved by one position. The crystalline order is not fully restored with a partial dislocation. A dislocation defines the boundary between slipped and unslipped regions of material and as a result, must either form a complete loop, intersect other dislocations or defects, or extend to the edges of the crystal. A dislocation can be characterised by the distance and direction of movement it causes to atoms which is defined by the Burgers vector. Plastic deformation of a material occurs by the creation and movement of many dislocations. The number and arrangement of dislocations influences many of the properties of materials.
The two primary types of dislocations are sessile dislocations which are immobile and glissile dislocations which are mobile. Examples of sessile dislocations are the stair-rod dislocation and the Lomer–Cottrell junction. The two main types of mobile dislocations are edge and screw dislocations.